Prevention of Protein Loss Using A Shield Coating According to Moisture Behavior in Human Hair

ty10086 提交于 周四, 08/26/2021 - 12:48
文章英文标题
Prevention of Protein Loss Using A Shield Coating According to Moisture Behavior in Human Hair
正文
세정 과정에서 물에 의한 단백질 소실을 차폐막을 통해서 방지 하고자 먼저 모발 내부의 물 거동 경로를 파악하였다. 이를 위해서 소수성을 가지는 건강한 모발과, 모발 내부는 정상이지만 표면의 최외곽 지질층에서 18-methyleicosanoic acid (18-MEA)만 소실시켜 친수성이 된 모발과, 다시 표면에 18-MEA를 결합시킨 회복모를 이용해서 모발 수분의 거동을 파악하였다. 모발에 열을 가할 때 일어나는 수분 증발에 따른 질량 변화를 관찰한 결과 표면이 소수성인 모발들은 39 s와 151 s의 두개의 시간 상수로 감소하였다. 이에 반해 표면이 친수성으로 변한 손상 모발에서는 83 s의 하나의 빠른 시간 상수로 감소함을 확인하였는데, 이는 모발 내부에 있는 비결합과 결합 수분들이 외곽으로 빠져나올때 모발 표면에 소수성 막이 없음으로써 바로 용출됨을 반증한다. 따라서 세정과정에서 모발 내부의 단백질 용출을 효율적으로 방지하기 위해서는 모발 표면을 소수성 코팅하여 물분자의 거동을 저지시킬 필요가 있을 것이라는 가정한 결과 친수성 polyethylene glycol (PEG)를 코팅한 경우 179 \u0026#13197;/mL의 단백질이 용출한데 반해서 소수성 polydimethylsiloxane (PDMS)를 코팅한 모발은 보다 적은 148 \u0026#13197;/mL를 용출하였으며, 표면을 소수성 및 친수성으로 코팅하여 모발 내부 단백질을 검량하여 비교하였다. 마침내 소수성 차폐막이 세정 과정에서 모발 단백질 소실을 방어하는 방법이 됨을 확인하였고, 이 소수성 지표를 lateral force microscopy (LFM) 값으로 환산하여 정리하였다. 마침내 이 연구 결과물은 세정 과정에서 발생하는 단백질 소실을 소수성 코팅막을 부여함으로써 막을 수 있는 모발 세정제품 개발에 기여할 수 있다.To prevent loss of hair protein during hair washing process by water through, a shield coating the pathway of water molecules was studied. Hydrophobic virgin hair, hydrophilic hair, which was damaged only methyleicosanoic acid (18-MEA) on the surface, and a repaired hair re-bound 18-MEA, were prepared and water mass changes by as heat were measured. Results showed that hydrophobic hairs followed bi-exponential function of 39 s and 151 s and other two hairs exhibited fast- and mono-exponential decay with 83 s, reflecting the extraction of water molecules without any resistance at the hydrophobic surface. On the assumption that hydrophobic surface resists an extraction of protein in water during the wash, the protein concentrations were compared from the hair of hydrophobic and hydrophilic surface. The extracted hair proteins were 179 and 148 \u0026#13197;/mL from the hair coated with hydrophilic polyethylene glycol (PEG) and hydrophobic polydimethylsiloxane (PDMS), respectively. This study suggested that hydrophobic coating on the hair surface could be used to prevent protein loss in wash, represented by LFM. In conclusion, this research provides some useful information to contribute to the development of hair washing products that can prevent protein loss in the cleaning process by granting hydrophobic coatings.
文章内容(英文)
세정 과정에서 물에 의한 단백질 소실을 차폐막을 통해서 방지 하고자 먼저 모발 내부의 물 거동 경로를 파악하였다. 이를 위해서 소수성을 가지는 건강한 모발과, 모발 내부는 정상이지만 표면의 최외곽 지질층에서 18-methyleicosanoic acid (18-MEA)만 소실시켜 친수성이 된 모발과, 다시 표면에 18-MEA를 결합시킨 회복모를 이용해서 모발 수분의 거동을 파악하였다. 모발에 열을 가할 때 일어나는 수분 증발에 따른 질량 변화를 관찰한 결과 표면이 소수성인 모발들은 39 s와 151 s의 두개의 시간 상수로 감소하였다. 이에 반해 표면이 친수성으로 변한 손상 모발에서는 83 s의 하나의 빠른 시간 상수로 감소함을 확인하였는데, 이는 모발 내부에 있는 비결합과 결합 수분들이 외곽으로 빠져나올때 모발 표면에 소수성 막이 없음으로써 바로 용출됨을 반증한다. 따라서 세정과정에서 모발 내부의 단백질 용출을 효율적으로 방지하기 위해서는 모발 표면을 소수성 코팅하여 물분자의 거동을 저지시킬 필요가 있을 것이라는 가정한 결과 친수성 polyethylene glycol (PEG)를 코팅한 경우 179 \u0026#13197;/mL의 단백질이 용출한데 반해서 소수성 polydimethylsiloxane (PDMS)를 코팅한 모발은 보다 적은 148 \u0026#13197;/mL를 용출하였으며, 표면을 소수성 및 친수성으로 코팅하여 모발 내부 단백질을 검량하여 비교하였다. 마침내 소수성 차폐막이 세정 과정에서 모발 단백질 소실을 방어하는 방법이 됨을 확인하였고, 이 소수성 지표를 lateral force microscopy (LFM) 값으로 환산하여 정리하였다. 마침내 이 연구 결과물은 세정 과정에서 발생하는 단백질 소실을 소수성 코팅막을 부여함으로써 막을 수 있는 모발 세정제품 개발에 기여할 수 있다.To prevent loss of hair protein during hair washing process by water through, a shield coating the pathway of water molecules was studied. Hydrophobic virgin hair, hydrophilic hair, which was damaged only methyleicosanoic acid (18-MEA) on the surface, and a repaired hair re-bound 18-MEA, were prepared and water mass changes by as heat were measured. Results showed that hydrophobic hairs followed bi-exponential function of 39 s and 151 s and other two hairs exhibited fast- and mono-exponential decay with 83 s, reflecting the extraction of water molecules without any resistance at the hydrophobic surface. On the assumption that hydrophobic surface resists an extraction of protein in water during the wash, the protein concentrations were compared from the hair of hydrophobic and hydrophilic surface. The extracted hair proteins were 179 and 148 \u0026#13197;/mL from the hair coated with hydrophilic polyethylene glycol (PEG) and hydrophobic polydimethylsiloxane (PDMS), respectively. This study suggested that hydrophobic coating on the hair surface could be used to prevent protein loss in wash, represented by LFM. In conclusion, this research provides some useful information to contribute to the development of hair washing products that can prevent protein loss in the cleaning process by granting hydrophobic coatings.
来源出处
Journal|[J]Journal of the Society of Cosmetic Scientists of KoreaVolume 46, Issue 1. 2020. PP 57-65

PDMS臻品推荐

PDMS-微流控基质材料-PDMS/道康宁SYLGARD184-聚二甲基硅氧烷/0.5KG(组)

产品说明书PDF自助在线看:http://www.pdmshub.com/sih

信息更新:

美国总工厂生产的0.5KG原始包装的PDMS延期至2021年9月16日后才能交货,默认我们将发国内库存的进口分装产品(02085925-0.5KG);另受制于有机硅大幅涨价潮影响,2021年9月1日后将上调销售价格,另行通知。Dow Corning=道康宁=Dow SiL=陶氏,都是同一家公司。 2021.09.01更新

美国总工厂生产的0.5KG包装的PDMS恢复正常进口,合法正规,质量金标准,欢迎订购使用。并承诺从我司购买的皆为原厂包装,100%未开封,附带技术手册,非国产灌装仿制、非分装、非仿冒外包装产品,可以放心使用。大量订购更有优惠。2021.04.01更新

备注:由于dowsil与道康宁公司合并,美国总工厂生产的PDMS,价格涨幅高达1倍之多,因针对科研用户使用,特备货规格0.5KG。如果您需要美国总工厂原厂生产的大规格包装的预定,可以与QQ 11366508联系给予报价/货期。2021.05更新

此链接为PDMS-微流控芯片/PDMS/道康宁SYLGARD184/小桶0.5KG装的链接。

一般性的产品性能参数表参考以下小桶装的参数:

微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;

品牌型号:道康宁SYLGARD184

包装规格:0.5KG/罐[含有45.4g固化剂,总重量为0.5KG]

产品颜色:保质期限:36个月

存放环境说明:室温,阴凉处保存

备注说明:

美国道康宁道康宁SYLGARD 184硅橡胶是由液体组分组成的双组分套件产品,包括基本组分与固化剂。基本组分与固化剂按10:1重量比完全混合,中等粘度混合液的稠度与SAE 40机油相似。无论厚薄,混合液将固化成为具有韧性的透明弹性体,最适用于电子/电气方面的封装与灌封应用。 道康宁SYLGARD 184硅橡胶在25~150℃的温度范围内固化,无放热现象,无需二次固化。固化过程完成后,可立即在-55~200℃的温度范围内使用。 产品特性:低毒性,在常规的工业操作中,无特别的注意事项; 无溶剂或固化副产物, 固化时不放热;无需特殊的通风条件,不会产生腐蚀;固化时,收缩量小; 固化后, 透明具有弹性;抗震与减缓机械震动;振动的传递性能小;元件可裸视检查与易修补性; 环保性能;低吸水性,良好的耐辐射性能;高真空状态下的低漏气性; 优异的电性能;较大温度范围内的稳定性, 抗解聚;在-55~200℃范围内,甚至在密闭状态下保持弹性与柔韧性,性能稳定; 阻燃性,UL可燃性分级为94 V-1,温度等级:130℃ 产品用途: 道康宁SYLGARD 184硅橡胶在电气/电子的封装与灌封方面有广泛的应用。