Formation of tabular plutons - results and implications of centrifuge modelling

ty10086 提交于 周四, 08/26/2021 - 13:04
文章英文标题
Formation of tabular plutons - results and implications of centrifuge modelling
正文
Geophysical investigations reveal that many granitoid plutons possess a tabular shape: either laccolithic, lopolithic or phacolithic. In this study, the results of a centrifuge experiment are used to understand the formation mechanisms of these features. The model was build of a sequence of 14 differently coloured plasticine layers. Two buoyant layers - with a volume of c. 40 cm\u003csup\u003e3\u003c/sup\u003e each - were incorporated into the model stratigraphy at different depths to investigate, whether the rise and emplacement of buoyant material at different levels results in different intrusion structures.After centrifuging for 30 min at 700 G, both the buoyant layers had formed two lenticular sills (phacoliths) with aspect ratios (length/thickness) of 6 and 3.4 for the upper and lower phacoliths, respectively, directly above both pre-existing perturbations in the buoyant layers. During their movement, the buoyant phacoliths had pushed their roof plasticine upward. Simultaneously, their floor plasticine had subsided (bottom sinking). Subsidence of the floor material had choked the inflow of further buoyant material into the feeder channel of the developing sills and inhibited their further lateral growth.The observed forced downward movement of the plasticine floor of the forming PDMS (polydimethylsiloxane) phacoliths resembles the so-called “floor depression” of host rock material around an emplacing tabular pluton. Floor depression is supposed to be a very important vertical material transfer process, which provides space for the construction of lopo- and phacoliths. The subsidence of host material made space for the developing buoyant phacoliths, but also restricted their growth to a certain time slot before the influx of new buoyant material into the feeder dyke of the tabular intrusive body was shut off. Similarly, in nature, the growth of a tabular pluton might be limited not only by the rate of magma ascent and its physical properties, but also by the emplacement processes of the evolving pluton.
文章内容(英文)
Geophysical investigations reveal that many granitoid plutons possess a tabular shape: either laccolithic, lopolithic or phacolithic. In this study, the results of a centrifuge experiment are used to understand the formation mechanisms of these features. The model was build of a sequence of 14 differently coloured plasticine layers. Two buoyant layers - with a volume of c. 40 cm\u003csup\u003e3\u003c/sup\u003e each - were incorporated into the model stratigraphy at different depths to investigate, whether the rise and emplacement of buoyant material at different levels results in different intrusion structures.After centrifuging for 30 min at 700 G, both the buoyant layers had formed two lenticular sills (phacoliths) with aspect ratios (length/thickness) of 6 and 3.4 for the upper and lower phacoliths, respectively, directly above both pre-existing perturbations in the buoyant layers. During their movement, the buoyant phacoliths had pushed their roof plasticine upward. Simultaneously, their floor plasticine had subsided (bottom sinking). Subsidence of the floor material had choked the inflow of further buoyant material into the feeder channel of the developing sills and inhibited their further lateral growth.The observed forced downward movement of the plasticine floor of the forming PDMS (polydimethylsiloxane) phacoliths resembles the so-called “floor depression” of host rock material around an emplacing tabular pluton. Floor depression is supposed to be a very important vertical material transfer process, which provides space for the construction of lopo- and phacoliths. The subsidence of host material made space for the developing buoyant phacoliths, but also restricted their growth to a certain time slot before the influx of new buoyant material into the feeder dyke of the tabular intrusive body was shut off. Similarly, in nature, the growth of a tabular pluton might be limited not only by the rate of magma ascent and its physical properties, but also by the emplacement processes of the evolving pluton.
来源出处
Journal|[J]Journal of GeosciencesVolume 53, Issue 3-4. 2009. PP 253

PDMS臻品推荐

PDMS-微流控基质材料-PDMS/道康宁SYLGARD184-聚二甲基硅氧烷/0.5KG(组)

产品说明书PDF自助在线看:http://www.pdmshub.com/sih

信息更新:

美国总工厂生产的0.5KG原始包装的PDMS延期至2021年9月16日后才能交货,默认我们将发国内库存的进口分装产品(02085925-0.5KG);另受制于有机硅大幅涨价潮影响,2021年9月1日后将上调销售价格,另行通知。Dow Corning=道康宁=Dow SiL=陶氏,都是同一家公司。 2021.09.01更新

美国总工厂生产的0.5KG包装的PDMS恢复正常进口,合法正规,质量金标准,欢迎订购使用。并承诺从我司购买的皆为原厂包装,100%未开封,附带技术手册,非国产灌装仿制、非分装、非仿冒外包装产品,可以放心使用。大量订购更有优惠。2021.04.01更新

备注:由于dowsil与道康宁公司合并,美国总工厂生产的PDMS,价格涨幅高达1倍之多,因针对科研用户使用,特备货规格0.5KG。如果您需要美国总工厂原厂生产的大规格包装的预定,可以与QQ 11366508联系给予报价/货期。2021.05更新

此链接为PDMS-微流控芯片/PDMS/道康宁SYLGARD184/小桶0.5KG装的链接。

一般性的产品性能参数表参考以下小桶装的参数:

微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;

品牌型号:道康宁SYLGARD184

包装规格:0.5KG/罐[含有45.4g固化剂,总重量为0.5KG]

产品颜色:保质期限:36个月

存放环境说明:室温,阴凉处保存

备注说明:

美国道康宁道康宁SYLGARD 184硅橡胶是由液体组分组成的双组分套件产品,包括基本组分与固化剂。基本组分与固化剂按10:1重量比完全混合,中等粘度混合液的稠度与SAE 40机油相似。无论厚薄,混合液将固化成为具有韧性的透明弹性体,最适用于电子/电气方面的封装与灌封应用。 道康宁SYLGARD 184硅橡胶在25~150℃的温度范围内固化,无放热现象,无需二次固化。固化过程完成后,可立即在-55~200℃的温度范围内使用。 产品特性:低毒性,在常规的工业操作中,无特别的注意事项; 无溶剂或固化副产物, 固化时不放热;无需特殊的通风条件,不会产生腐蚀;固化时,收缩量小; 固化后, 透明具有弹性;抗震与减缓机械震动;振动的传递性能小;元件可裸视检查与易修补性; 环保性能;低吸水性,良好的耐辐射性能;高真空状态下的低漏气性; 优异的电性能;较大温度范围内的稳定性, 抗解聚;在-55~200℃范围内,甚至在密闭状态下保持弹性与柔韧性,性能稳定; 阻燃性,UL可燃性分级为94 V-1,温度等级:130℃ 产品用途: 道康宁SYLGARD 184硅橡胶在电气/电子的封装与灌封方面有广泛的应用。