电化学发光成像用于球形体的高通量分析

ty10086 提交于 周三, 08/25/2021 - 15:46
文章英文标题
Electrochemiluminescence Imaging for High Throughput Analysis of Spheroids
正文
引言三维培养的细胞,如球状细胞,由于能有效模拟生理背景下的细胞反应和代谢活动,被认为是药物筛选和再生医学的很有前景的模型。为了进一步研究它们在临床应用中的功能,需要对活体球体进行高通量分析。为了电化学评价球体的细胞活性,扫描电化学显微镜( SECM )得到了广泛的应用1;存在通入度低、扫描探头控制复杂等缺点。另一种策略利用电极阵列器件实现了这一目的2,尽管空间分辨率受到集成电极数量和尺寸的限制。这里,我们提出了用于评价三维细胞球体细胞活性的电化学发光( ECL )成像系统。ECL是一种利用电化学反应产生发光的光学技术,广泛应用于生物分析领域。ECL独特的设置简单、发光的时间可控性等特点,有利于分析细胞和来源于细胞的分子。然而,将ECL应用于三维细胞球体成像的研究却很少。L-012,鲁米诺类似物作为ECL发光体,在H2O2存在下发出强发光。在该体系中,通过电化学还原O2原位生成H2O2,将H2O2氧化为L - 012。通过电化学还原O2为H2O2,获得了L-012的高效发光。此外,由于活细胞球体消耗O2维持细胞活性,球体周围环境中O2的电化学还原受到阻碍,导致球体周围的发光减弱。由此可见,ECL抑制的分布表明一个球体的呼吸活动。为验证所提ECL系统的可行性,本实验采用ECL成像和SECM两种方法对间充质干细胞( MSC )球体呼吸活性进行测定。最后,在ECL成像中显示了活的MSC球体细胞活动的时间延迟和多次成像。实验ECL系统由Au基底作为工作电极,Ag / AgCl和Pt丝分别作为参比电极和对电极组成。将聚二甲基硅氧烷( PDMS )制成的腔体粘接在Au基底上。电极连接在恒电位仪上,安装在体视显微镜上。为了演示ECL成像对细胞活性的影响,制备了人间充质干细胞( hMSCs )。为制备球状细胞,将MSCs以每孔2×105个细胞接种于DMEM的96孔U型底板中。48 h内形成MSC球体,随后用商业分化培养基诱导半数球体发生成软骨分化。在ECL成像中,将200 mM L-012溶液( PBS,pH 7.4 )引入腔内,用微量移液器将球状物固定在基底上。先施加-0.3 V的电位30 s生成H2O2,再施加0.7 V的电位30 s氧化L-0.12。潜在应用期间,ECL图像由曝光时间为30 s的数码相机拍摄。对于时间延迟成像,在Au电极上一次性引入多个球体,静置2 ~ 60 min后进行ECL成像。结果与讨论在MSC球体的ECL图像中,球体的体部显示出光亮的发射,可能是由于球体的致密球状结构从ECL中散射光所致。在活球处,球体的圆周变暗,说明由于球体消耗O2,ECL被抑制。事实上,固定球周围的ECL没有被抑制,因为这些细胞没有呼吸活性。有趣的是,与对照和分化诱导的球状体相比,下降幅度较大
文章内容(英文)
Introduction Three-dimensional cultured cells, such as spheroids are believed to be promising models for drug screening and regenerative medicine because they effectively mimic the cellular response and metabolic activity in physiological contexts. To further study their functions for applications in clinical contexts, high-throughput analysis of living spheroids is required. To electrochemically evaluate cellular activity of spheroids, scanning electrochemical microscopy (SECM) has been widely used1; with the shortcomings of low through put and complicated control of scanning a probe. Another strategy utilized electrode array devices to this end2, although the spatial resolution is limited by the numbers and sizes of integrated electrodes. Here, we present electrochemiluminescence (ECL) imaging system for evaluation of cellular activity of 3D cell spheroids. ECL is an optical technique that utilizes electrochemical reaction to produce luminescence, and widely used in bioanalytical field. The unique features of ECL such as simple setups and temporal controllability of light emission are favorable for analysis of cells and molecules derived from cells. However, there is few studies which apply ECL for imaging of 3D cell spheroids. L-012, a luminol analog was used for ECL luminophore, which emits strong luminescence in the presence of H2O2. In the proposed system, H2O2 was generated in situ by electrochemical reduction of O2, former to the electrochemical oxidation of L-012. Owing to the electrochemical reduction of O2 to H2O2, efficient luminescence of L-012 was obtained. Moreover, as living cell spheroids consume O2 to maintain cellular activity, the electrochemical reduction of O2 is hindered at the peripheral environment of a spheroid, resulting with decrease in luminescence around the spheroid. Thus, the distribution of ECL suppression indicates the respiratory activity of a spheroid. To demonstrate feasibility of the proposed ECL system, the respiratory activity of mesenchymal stem cell (MSC) spheroids was measured either with ECL imaging and SECM. Finally, time-lapse and multiple imaging of the cellular activity of the living MSC spheroids were demonstrated in the ECL imaging. Experimental The ECL system was composed of an Au substrate as a working electrode, an Ag/AgCl and a Pt wire as a reference and counter electrode, respectively. A chamber made of polydimethylsiloxane (PDMS) was bonded on the Au substrate. The electrodes were connected to a potentiostat and mounted on a stereomicroscope. To demonstrate ECL imaging of cell activities, human mesenchymal stem cells (hMSCs) were prepared. For fabrication of spheroids, the MSCs were seeded at 2×105 cells per well in a 96-well U-bottom plate in DMEM. MSC spheroids were formed within 48 h and the half of the spheroids were induced to chondrogenic differentiation by commercial differentiation medium subsequently. For ECL imaging, 200 mM L-012 solution (PBS, pH 7.4) was introduced to the chamber, and spheroids were settled on the substrate using a micropipette. A potential of -0.3 V was applied for 30 s to generate H2O2, followed by +0.7 V for 30 s to oxidize L-012. During the potential apply, ECL images were taken by a digital camera with 30 s of exposure time. For the time-lapse imaging, multiple spheroids were introduced on the Au electrode at once and ECL imaging was conducted 2–60 min after they settled. Results and discussion In the ECL images of MSC spheroids, the bodies of the spheroids displayed bright emission, possibly due to the compacted spherical structure of the spheroids that scattered light from ECL. At the living spheroid, the circumference of the spheroid became dark, indicating that the ECL was suppressed due to O2 consumption of the spheroid. In fact, there was no suppression of ECL around fixed spheroids as there was no respiratory activity in those cells. Interestingly, in comparison with the control and differentiation induced spheroids, the decline of the ECL intensity was larger in the latter spheroid indicating inherent respiratory activity among induction of the differentiation. With the ECL images, the respiratory activity of the spheroids was calculated by quantifying the distribution of ECL intensity around the spheroid. The results corresponded well with that measured by SECM. The time-lapse ECL imaging of multiple MSC spheroids displayed subtle changes in the respiratory activity of the spheroids during observation. When the spheroids were removed from the electrode after 60 min, the area right under the spheroids remained slightly dark, indicating cellular components or metabolites might have adsorbed on the electrode surface. Overall, the ECL system enabled simultaneous analysis of cellular activity of multiple spheroids with good resolution comparable with that of SECM, while the measurement time was highly improved with a single flat electrode for ECL reaction. References Kaoru Hiramoto et al., Electrochim. Acta, 340, 135979, (2020)Kosuke Ino et al., Electrochim. Acta, 268, 554-561, (2018)
来源出处
Journal|[J]Meeting AbstractsVolume MA2021-01, Issue 61. 2021.
DOI
https://doi.org/10.1149/MA2021-01611621MTGABS

PDMS臻品推荐

PDMS-微流控基质材料-PDMS/道康宁SYLGARD184-聚二甲基硅氧烷/0.5KG(组)

产品说明书PDF自助在线看:http://www.pdmshub.com/sih

信息更新:

美国总工厂生产的0.5KG原始包装的PDMS延期至2021年9月16日后才能交货,默认我们将发国内库存的进口分装产品(02085925-0.5KG);另受制于有机硅大幅涨价潮影响,2021年9月1日后将上调销售价格,另行通知。Dow Corning=道康宁=Dow SiL=陶氏,都是同一家公司。 2021.09.01更新

美国总工厂生产的0.5KG包装的PDMS恢复正常进口,合法正规,质量金标准,欢迎订购使用。并承诺从我司购买的皆为原厂包装,100%未开封,附带技术手册,非国产灌装仿制、非分装、非仿冒外包装产品,可以放心使用。大量订购更有优惠。2021.04.01更新

备注:由于dowsil与道康宁公司合并,美国总工厂生产的PDMS,价格涨幅高达1倍之多,因针对科研用户使用,特备货规格0.5KG。如果您需要美国总工厂原厂生产的大规格包装的预定,可以与QQ 11366508联系给予报价/货期。2021.05更新

此链接为PDMS-微流控芯片/PDMS/道康宁SYLGARD184/小桶0.5KG装的链接。

一般性的产品性能参数表参考以下小桶装的参数:

微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;

品牌型号:道康宁SYLGARD184

包装规格:0.5KG/罐[含有45.4g固化剂,总重量为0.5KG]

产品颜色:保质期限:36个月

存放环境说明:室温,阴凉处保存

备注说明:

美国道康宁道康宁SYLGARD 184硅橡胶是由液体组分组成的双组分套件产品,包括基本组分与固化剂。基本组分与固化剂按10:1重量比完全混合,中等粘度混合液的稠度与SAE 40机油相似。无论厚薄,混合液将固化成为具有韧性的透明弹性体,最适用于电子/电气方面的封装与灌封应用。 道康宁SYLGARD 184硅橡胶在25~150℃的温度范围内固化,无放热现象,无需二次固化。固化过程完成后,可立即在-55~200℃的温度范围内使用。 产品特性:低毒性,在常规的工业操作中,无特别的注意事项; 无溶剂或固化副产物, 固化时不放热;无需特殊的通风条件,不会产生腐蚀;固化时,收缩量小; 固化后, 透明具有弹性;抗震与减缓机械震动;振动的传递性能小;元件可裸视检查与易修补性; 环保性能;低吸水性,良好的耐辐射性能;高真空状态下的低漏气性; 优异的电性能;较大温度范围内的稳定性, 抗解聚;在-55~200℃范围内,甚至在密闭状态下保持弹性与柔韧性,性能稳定; 阻燃性,UL可燃性分级为94 V-1,温度等级:130℃ 产品用途: 道康宁SYLGARD 184硅橡胶在电气/电子的封装与灌封方面有广泛的应用。